Angel Zabtchev, Romeo Alexandrov

ABSTRACT. A coil intended for magnetisation of finely ground magnetite ores during secondary extraction of iron is considered. It is in the shape of a cylindrical ring and is strung on the pulp tube, which is made of non–magnetic and non–conductive material. The coil has known dimensions of the inner diameter and length, obtained for technological reasons. A direct current with a large alternating current component flows through the coil, formed by a diode half–wave rectifier circuit. A methodology is given for determining the electrical parameters of the winding at a given mains supply voltage, heat load and cooling conditions.
Keywords: magnetising coil, magnetic separation, heat load

Zabtchev, A., R. Alexandrov
CALCULATION OF THE MAGNETISING COIL FOR IMPROVING THE MAGNETIC SEPARATION
DOI: 10.5281/zenodo.5594809
DOI: https://doi.org/10.58903/b15171923

References:

1. Aleksandrov R., Savov N., Ustroystvo za selektivna magnitna flokulatsia, Sbornik s dokladi, Natsionalna nauchno-tehnicheska konferentsia s mezhdunarodno uchastie Avtomatizatsia v minnata industria i metalurgiyata, BULKAMK’18, 15-16.11.2018, Sofia, 105-109, (in Bulgarian).

2. Kalantarov P. L., Zeitlin L. A., 1970. Raschet induktivnostey: Spravochnaya kniga, (in Russian).

3. Klisuranov G., 1989. Magnitni, elektricheski i spetsialni metodi na obogatyavane, Sofia, (in Bulgarian).