Todor Angelov
ABSTRACT. A composite flotation tailings sample from historic Medet tailings dam was characterised to understand occurrences of copper and hydraulic properties of the material and to determine if there is an economic benefit of its reprocessing using hydrometallurgical processes. Conventional ICP-OES multi-element scan and carbon and sulphur determination by Leco were followed by sequential copper assay and mineralogical analysis using the Tescan Integrated Mineral Analyser (TIMA) to identify the elemental composition, acid soluble copper and mineral abundance and liberation. The tailings sample contained 0.105% Cu, 0.41 % S and 0.05% C. The analysis of the gangue minerals showed that the bulk of the material is made up of plagioclase feldspar with moderate amounts of K-feldspars and small amounts of mica, chlorite and clay minerals. Copper minerals cuprite and chalcopyrite with minor amounts of covellite and bornite were observed in the mineralogical analysis of the sample by TIMA. Based on the sequential copper assays, it was estimated that approximately 59.8% of copper contained in the sample reports as acid soluble copper. To understand the flow behaviour in the material the main hydraulic properties like hydraulic conductivity and moisture retention capacity were determined.
Key words: tailings, copper, minerals, hydraulic properties
DOI: 10.5281/zenodo.7006957
DOI: https://doi.org/10.58903/c16182110
Todor Angelov
MINERALOGICAL AND HYDRAULIC CHARACTERISATION OF HISTORIC FLOTATION TAILINGS
1. Adajar M. A., Zarco M., 2014. An empirical model for predicting hydraulic conductivity of mine tailings, International Journal of GEOMATE, 7, 1054-1061. DOI: 10.21660/2014.14.140630
2. ASTM D 2434 – 68. 2006. Standard Test Method for Permeability of Granular Soils (Constant Head), in: Book of Standards Volume: 04.08 .6 https://www.astm.org/d2434-68r06.html (Withdrawn 2015)
3. ASTM D6836-16. 2016. Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer or Centrifuge, in: Book of Standards Volume: 04.09. 22 https://www.astm.org/d6836-16.html
4. Aubertin M., Bussière B., Chapuis R., 2011. Hydraulic conductivity of homogenised tailings from hard rock mines, Canadian Geotechnical Journal, 33, 470-482. https://doi.org/10.1139/t96-06 Volume 33, Number 3, July 1996 pp. 470-482.
5. Babel B., Penz M., Schach E., Boehme S., Rudolph M., 2018. Reprocessing of a southern Chilean Zn tailing by flotation-A case study, Minerals, 8, 295. https://doi.org/10.3390/min8070295
6. Dobrev T., Valchanova I., Stefanov Y., Magaeva S., 2009. Investigations of new anodic materials for zinc electrowinning, Transactions of the Institute of Metal Finishing, 87(3), 136-140. https://doi.org/10.1179/174591909X438938
7. Figueiredo J., Vila M., Fiúza A., Góis J., Futuro A., Dinis M., Martins D., 2019. A holistic approach in re-mining old tailings deposits for the supply of critical-metals: A Portuguese case study, Minerals, 9, 638. https://doi.org/10.3390/min9100638
8. Grigorova I., Dzhamyarov S., Nishkov I., 2015. Barite flotation concentrate from Kremikovtzi “black” tailings, Journal of International Scientific Publications: Materials, Methods & Technologies, 9, 561-577,
9. Grigorova I., 2011. Gravitatsionni tehnologii pri upravlenie na minni otpadatsi. Izd. Ritt, Silistra. (in Bulgarian).
10. Parkinson G. A., Bhappu R. B., 1995. The sequential copper analysis method – geological, mineralogical and metallurgical implications, SME Pre-print, 95-90. J-GLOBAL ID: 200902126277450610
11. Schulz B., Sandmann D., Gilbricht S., 2020. SEM-based automated mineralogy and its application in geo- and material sciences, Minerals, 10 (11), 1004. https://doi.org/10.3390/min10111004
12. Shengo M., Maloba B., 2013. Recovery of cobalt and copper through reprocessing of tailings from flotation of oxidised ores, Journal of Environmental Chemical Engineering, 1085–1090. https://doi.org/10.1016/j.jece.2013.08.025
13. Stanković V., Milosevic V., Milicevic D., Gorgievski M., Bogdanovic G., 2018. Reprocessing of the old flotation tailings deposited on the RTB Bor tailings pond – a case study, Chemical Industry and Chemical Engineering Quarterly, 24 (4), 333-344. DOI: 10.2298/CICEQ170817005S
14. Sultanov A., 2001. Geological Report, Results of the detailed exploration of the Medet tailings impoundment, 162.
15. Tonžetić I. Ž., 2015. Quantitative analysis of iron ore using SEM-based technologies, in: Iron Ore, ed. L. Lu, Woodhead Publishing, 161-189. https://doi.org/10.1016/B978-0-12-820226-5.00018-5
16. Valchanova I., Stefanov Y., Stefanov K., Tabakova N., Dobrev T., 2011. Blocking of harmful effect of bismuth ions during electroextraction of zinc from sulphate electrolytes, Transactions of the Institute of Metal Finishing, 89(4), 210-214. https://doi.org/10.1179/174591911X13076168667272
17. Yankova T., 2020. Mineral processing waste utilisation, Proceedings of the XX International Multidisciplinary Scientific GeoConference, Bulgaria, 821-828, DOI: 10.5593/sgem2020/1.1/s04.100