O.V. Fedoskina, M.M. Yerisov, V.O. Fedoskin

 Dnipro University of Technology, Dnipro, Ukraine. Emails: erisov@ukr.net, fedoskin.va@ukr.net

Corresponding author: fedoskina.ev@gmail.com

 ABSTRACT. An innovative method of vibro-impact grinding of geological samples, implemented in a vibrating jaw crusher with an inclined crushing chamber, is considered to obtain a product of -1 mm in one crushing cycle. The technique consisted in comparing the results of crushing quartzite and magnetite with a particle size of 60…80 mm according to the existing multi-stage technology using jaw and roller crushers, as well as the proposed single-stage technology using a vibrating jaw crusher. Three technological schemes for the preparation of samples of quartzite and magnetite were modelled with obtaining granulometric characteristics after each piece of equipment. The analysis of the results showed almost the same particle size distribution of the samples according to the multi-stage scheme: jaw crusher, screening -2mm, roller crusher, screening -1mm and single-stage: vibrating jaw crusher, screening -1mm. The output of the finished material was 80%. The studies substantiated the feasibility of creating a small-sized vibrating jaw crusher with a crushing ratio of i ≥ 100 for the preparation of geological samples, operating in an open cycle and replacing at least two pieces of crushing equipment, two screens and mounting elements, which significantly reduces the metal consumption of the structure, the occupied area and simplifies maintenance.

Key words: vibratory jaw crusher, grinding, geological sample, sample preparation, degree of crushing

DOI: https://doi.org/10.58903/u17190826

FEATURES OF VIBRATION CRUSHING OF GEOLOGICAL SAMPLES OF MATERIAL

References

Altshul, G. M., Gouskov, A. M., Panovko, G. Y. & Shokhin, A. E. (2020). Interaction model of one jaw of a vibrating jaw crusher with the processed rock, taking into account the properties of the electric motor, IOP Conf. Series: Materials Science and Engineering, 747, 012047, DOI 10.1088/1757-899X/747/1/012047

Altshul, G. M., Gouskov, A. M. & Panovko, G. Y. (2021). Modelling of the interaction between a rock being processed and a vibratory jaw crusher. Journal of Machinery Manufacture and Reliability, 50, 26-33 https://doi.org/10.3103/S1052618821010052

Balaram, V. & Subramanyam, K. S. V. (2022). Sample preparation for geochemical analysis: strategies and significance. Advances in Sample Preparation, 1, 100010, https://doi.org/10.1016/j.sampre.2022.100010.

Biletskyi, V. S., Oliinyk, T. A., Smyrnov, V. O. & Skliar, L.V. (2019). Tekhnika ta tekhnolohiia zbahachennia korysnykh kopalyn. Chastyna I. Pidhotovchi protsesy. [Technique and technology of mineral enrichment. Part I. Preparatory processes], Kryvyi Rih: Vydavets FOP Cherniavskyi D.O. (in Ukrainian).

Evans, N. J., Davis, J. J., Byrne, J. P. & French, D. (2003). Contamination-free preparation of geological samples for ultra-trace gold and platinum-group element analysis. Journal of Geochemical Exploration, 80(1), 19-24 https://doi.org/10.1016/S0375-6742(03)00140-7

Fedoskin, V. O. (1982) Dinamika i razrabotka metodov rascheyta vibroizmelchitelnyih mashin vibroudarnogo deystviya [Dynamics and development of methods for calculating vibro-crushing machines of vibro-impact action], Avtoreferat kandydats’koi dysertatsii [Abstract of thesis candidate’s dissertation]. Georgian Polytechnic Institute, Tbilisi, Georgia (in Russian).

Fedoskina, O. V., Franchuk, V. P., Fedoskin, V. О. & Haddad J. S. (2022). Improving the efficiency of the impact crusher with inclined working chamber. Geo-Technical Mechanics, 161, 66-74.

Franchuk, V. P. (2010). Vybratsyonnaia tekhnyka v malykh proyzvodstvakh [Vibration technology in small industries]. Geo-Technical Mechanics, 85, 290-296 (in Russ.).

Khytrov, V. H., Belousov, H. E., Bozhevolnova, N. A. et al. (1985). Nadёzhnost analyza hornykh porod (fakty, problemy, reshenyia) [Reliability of rock analysis (facts, problems, solutions)], Nauka, (in Russian).

Korman, T., Bedekovic, G., Kujundzic, T. & Kuhinek, D. (2015). Impact of physical and mechanical properties of rocks on energy consumption of jaw crusher. Physicochemical Problems of Mineral Processing, 51(2), 461-475
DOI: https://doi.org/10.5277/ppmp150208

Mazur, M. (2017). Possible applications of vibratory technology in crushing technological lines. International Multidisciplinary Scientific GeoConference. SGEM, Bulgaria: 17 (1.1), 965-972. DOI:10.5593/sgem2017/11

Mazur, M. (2019). Examples of vibratory crushers applications in crushing technological lines. New Trends in Production Engineering, 2(1), 28-36 https://doi.org/10.2478/ntpe-2019-0003

Mishchuk, Ye. (2014). Teoretychni doslidzhennia robochoho protsesu vibratsiinoi shchokovoi drobarky [Theoretical studies of the working process of a vibratory jaw crusher]. Zbirnyk naukovykh prats (haluzeve mashynobuduvannia, budivnytstvo) [Digest of scientific works (industry mechanical engineering, construction)], 3(42), 70-77 (in Ukrainian).

Okechukwu, C., Dahunsi, O.A., Oke, P.K., Oladele, I.O., Dauda, M. & Olaleye, B.M. (2017) Design and operations challenges of a single toggle jaw crusher: a review. Nigerian Journal of Technology, 36(3), 814 – 821. http://dx.doi.org/10.4314/njt.v36i3.22

Ostroumov, H. V. (Ed.). (1979). Metodycheskye osnovy yssledovanyia khymycheskoho sostava hornykh porod, rud y myneralov [Methodological foundations for the study of the chemical composition of rocks, ores and minerals]. Nedra (in Russian).

Shokhin, A. E. (2020). Self-synchronisation of a vibrating jaw crusher with allowance for interaction with the medium processed. Journal of Machinery Manufacture and Reliability, 49, 500-510. https://doi.org/10.3103/S1052618820060084

Sidor, J., & Mazur, M. (2013). Zastosowanie kruszarki wibracyjnej w procesach bardzo drobnego kruszenia surowców mineralnych i przemysłowych odpadów ceramicznych [The use of a vibratory crusher in processes of very fine crushing of raw materials and industrial waste ceramics]. Ceramic Materials, 65(1), 71-75 (in Poland). https://journals.indexcopernicus.com/search/article?articleId=1183014

Sidor, J., & Mazur, M. (2014). Badania procesu rozdrabniania kryształu górskiego w wibracyjnej kruszarki [Examination of crushing rock crystal in a vibratory jaw crusher]. Ceramic Materials, 66(1), 32-36 (in Poland). https://journals.indexcopernicus.com/search/article?articleId=1176611

Wolny, S. (2013). Dynamic behaviour of a vibrating jaw crusher for disintegration of hard materials. Archives of metallurgy and materials, 58(3), 883-886.DOI: 10.2478/amm-2013-0092